Home Blog


PLC Splitter Applications in FTTH Network

  • Dec 26,2016

FTTH mainly uses PON network technology, which requires a large number of low-cost optical splitters and other optical passive. Optical splitter device is an integral part of FTTH and with the promotion of FTTH, there would be a great market demand. The traditional preparation of optical splitter technology is fiber fused biconical taper (FBT) technology. Its characteristics are mature and simple ...

Continue reading +

Loose-Tube and Tight-Buffer Cable Application of FTTH

  • Dec 19,2016

FTTH makes use of Fiber Optic technology to enhance communication for households. FTTH stands for Fiber to the Home, and many experts believe that FTTH cable will soon replace the traditional copper cables. There are various other elements of FTTH. FTTH Flat Drop Cable is generally also known as indoor cable. Other elements of the technology include instrumentation cables and cable glands. Next le...

Continue reading +

There Are Various Types Of Fiber Termination Box (Ftb) Solutions For Different Applications

  • Dec 13,2016

Fiber to the x (FTTX) is a generic term for any broadband network architecture using optical fiber to provide all or part of the local loop used for last mile telecommunications. As Fiber Optic Cables are able to carry much more data than copper cables, especially over long distances, copper telephone networks built in the 20th century are being replaced by fiber. FTTx network architecture is...

Continue reading +

K&M FTTX Total Solutions

  • Dec 06,2016

K&M FTTX Total Solutions Overview of FTTx According to the distance between ONU or access equipment and subscriber, FTTx is classified as: FTTC: Fiber to The Curb FTTB: Fiber to The Building FTTH: Fiber to The Home Overview of FTTx _ ADC solution Overview of FTTx _Corning Evolant solution Overview of FTTx -3 M solutions Overview of FTTx _ North American solution From the Network structure of t...

Continue reading +

How to use Field Connector or Terminating fiber-optic cable to quick-connect connectors

  • Dec 01,2016

Field Connector In FTTH installations the optical drop cable will differ in length for every house, traditional fixed length patch cords will not always be suitable. The K&M field connector removes this problem as it can be fit- ted with no epoxy or power requirements in less than two minutes. Features: • No epoxy, no polishing • Well suited for FTTX • Less than two minutes assembly time ...

Continue reading +

Single Mode vs. Multi-mode Fiber Optic Patch Cord Cables

  • Nov 29,2016

Normally when we compare Single Mode and Multi-mode Fiber Optic Patch Cords, We have to make clear about what is the difference of Single mode and Multi-mode fiber, now let’s get down to below definitions: Single Mode Single Mode cable is a single stand of glass fiber with a diameter of 8.3 to 10 microns that has one mode of transmission. Single Mode Fiber with a relatively narrow diameter, throug...

Continue reading +

Lightning protection of fiber optical splice closure

  • Nov 28,2016

For the lightning protection of the fiber optic splice closure in the optical cable line, it can be targeted to the local weather and terrain and other natural conditions. Through the analysis of the fiber optic splice closure in these years, it is found that the following problems should be paid attention to in the construction and maintenance of the fiber optic splice closure. 1. for the aerial ...

Continue reading +

[  A total of 1 pages  ]
Question ?

Need a quote? Have a question ? Ask us!

  • Tel : +86-13590161197
  • Fax : +86-755-88608770
  • Email :
  • Add : 403,Unit 5,BLDG.2,Zhongxin LongSheng Plaza,LongGang Community,Longgang Dist Shenzhen,518116,P.R China

Hot Products